Vertical drilling machine
Z5125A / Z5132A Vertical Drilling Machine
25 mm and 32 mm box-column machines for drilling, reaming, counterboring and tapping. Automatic spindle reversing and inching feed are what make blind holes and depth setting workable on a manual drill.
Features
- A box-column general purpose machine: drilling, reaming, spot facing, counterboring, boring and tapping all run on the same frame.
- Automatic spindle reversing and inching feed make blind holes and depth setting straightforward to set.
- A centrifugal friction clutch in the main drive takes the shock out of reversing and works as torque overload protection.
- Tool withdrawal is by push rod.
- Wide speed range, low noise, centralised controls and open access for maintenance.
Specification
Published catalogue figures for the series; the columns for this model are highlighted. Options and non-standard travels are quoted separately.
| Item | Unit | Z5125A | Z5132A | Z5140A | Z5150A | Z5163C | Z5180C | Z5632·4A |
|---|---|---|---|---|---|---|---|---|
| Capacity | ||||||||
| Max. drilling diameter | mm | Φ25 | Φ32 | Φ40 | Φ50 | Φ63 | Φ80 | Φ32 |
| Max. spindle feed resistance | N | 9000 | 9000 | 16000 | 16000 | 30000 | 30000 | 9000 |
| Max. spindle torque | N·m | 160 | 160 | 350 | 350 | 800 | 800 | 160 |
| Main motor power | kW | 2.2 | 2.2 | 3 | 3 | 5.5 | 5.5 | 2.2 |
| Spindle | ||||||||
| Spindle taper | Morse | 3 | 4 | 4 | 5 | 5 | 6 | 4 |
| Spindle speed | r/min | 50-2000 9 steps | 50-2000 9 steps | 31.5-1400 12 steps | 31.5-1400 12 steps | 40-570 9 steps | 40-570 9 steps | 50-2000 9 steps |
| Spindle feed rate | mm/r | 0.056-1.80 9 steps | 0.056-1.80 9 steps | 0.056-1.8 9 steps | 0.056-1.8 9 steps | 0.11-0.78 6 steps | 0.11-0.78 6 steps | 0.056-1.80 9 steps |
| Spindle travel | mm | 200 | 200 | 250 | 250 | 250 | 250 | 200 |
| Spindle box travel | mm | 200 | 200 | 200 | 200 | 250 | 250 | 400 |
| Table and column | ||||||||
| Spindle axis to column guideway | mm | 280 | 280 | 335 | 335 | 375 | 375 | 280 |
| Worktable travel, manual | mm | 310 | 310 | 300 | 300 | 300 | 300 | — |
| Spindle nose to worktable, max. | mm | 710 | 710 | 750 | 750 | 850 | 850 | 710 |
| Worktable area | mm | 400×550 | 400×550 | 480×560 | 480×560 | 650×550 | 650×550 | 445×2675 |
| Weight and dimensions | ||||||||
| Machine weight, net / gross | kg | 950 / 1200 | 950 / 1200 | 1250 / 1500 | 1250 / 1890 | 2500 / 2800 | 2500 / 2800 | 4500 / 5500 |
| Overall dimensions, L × W × H | cm | 96×80×229 | 96×80×229 | 109×90×253 | 109×90×253 | 100×147×280 | 100×147×280 | 285×130×250 |
| Packing case, L × W × H | cm | 130×108×242 | 130×108×242 | 141×114×262 | 141×114×262 | 171×113×292 | 171×113×292 | 312×176×267 |
Request A Quote
Get A Tailored Quote For The Z5125A / Z5132A
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The Z5125A / Z5132A Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The Z5125A / Z5132A
What speeds and taper does the Z5125A / Z5132A run?
The Z5125A / Z5132A runs stated per model r/min on a 3 / 4 / 4 / 5 / 5 / 6 / 4 spindle taper. Big holes in tough material live at the bottom of the range where torque works; small holes want the top. A machine that covers both ends handles the whole job list instead of half of it.
What should I look at inside the Z5125A / Z5132A beyond the spec table?
Two build points matter most on this machine: a box-column general purpose machine: drilling, reaming, spot facing, counterboring, boring and tapping all run on the same frame; and automatic spindle reversing and inching feed make blind holes and depth setting straightforward to set. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
How should I read the drilling capacity figures on the Z5125A / Z5132A?
Capacity figures are quoted in steel — Φ25 / Φ32 / Φ40 / Φ50 / Φ63 / Φ80 / Φ32 mm on the Z5125A / Z5132A. Keep a working margin over your biggest regular hole rather than running the spindle at its limit all day: a machine bought at the limit wears its accuracy off first. In cast iron the same spindle works easier; in stainless, harder.
What separates the Z5125A / Z5132A from the Z5632·4A in this group?
Both sit in the vertical drilling machine group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
What is the lead time and warranty on the Z5125A / Z5132A?
Standard configurations generally ship within 30 to 60 days of a confirmed order, with the date written into the contract. The Z5125A / Z5132A then carries a 12-month warranty on main components, handled by the plant that built it, with lifetime technical support and spare parts identified by part number at handover.
