CNC drilling and milling machine
ZXK50 CNC Drilling and Milling Machine
A BT40 spindle at 30-2000 rpm on the same machining-centre base, with 850 × 500 × 600 mm of travel. Takes light milling as well as drilling and tapping, and a tool magazine can be fitted.
Features
- The base castings are special cast iron, using the bed and saddle from the vertical machining centre build. The table sits lower to the floor than on a conventional drill, which makes loading and unloading easier.
- Guideways and table are quenched and ground and run against plastic-faced liners with automatic intermittent lubrication, so feed stays smooth without stick-slip.
- X and Y axes are ballscrew driven with the motor coupled direct to the screw.
- High coolant flow and a wide chip slot keep heavy cutting clear.
- BT40 spindle nose, 30-2000 rpm, on a 5.5 / 7.5 kW two-speed motor.
- Light milling as well as drilling and tapping; a tool magazine can be fitted.
- Three axes and the spindle run under servo control, over 850 × 500 × 600 mm of travel.
Specification
Published catalogue figures for the series; the columns for this model are highlighted. Options and non-standard travels are quoted separately.
| Item | Unit | ZXK50 | ZXK80 |
|---|---|---|---|
| Capacity | |||
| Max. drilling diameter | mm | Φ50 | Φ80 |
| Max. spindle torque | N·m | 200 | 450 |
| Max. feed resistance | N | 16000 | 25000 |
| Main motor power | kW | 5.5 / 7.5 | 7.5 / 11 |
| Table and travel | |||
| Working area of table | mm | 1000×545 | |
| T-slot, width × quantity | mm | 18×3 | |
| Travel X / Y / Z | mm | 850×500×600 | 1000×650×600 |
| Spindle nose to worktable | mm | 200-800 | 180-780 |
| Spindle centre line to column | mm | 450 | 540 |
| Spindle | |||
| Spindle taper | — | BT40 | BT50 |
| Spindle speed | r/min | 30-2000 | 30-1051 |
| Rapid traverse X · Y / Z | m/min | 15 / 10 | 15 / 10 |
| Accuracy, weight and dimensions | |||
| Positioning accuracy | mm | 0.025 | |
| Repeatability | mm | 0.02 | 0.02 |
| Machine weight, net / gross | t | 4 / 4.5 | 6 / 6.5 |
| Overall dimensions, L × W × H | cm | 188×249×265 | 250×300×300 |
Request A Quote
Get A Tailored Quote For The ZXK50
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The ZXK50 Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The ZXK50
Why does the ZXK50’s speed range matter more than its top speed?
The ZXK50 runs 30-2000 / 30-1051 r/min on a BT40 / BT50 spindle taper. Big holes in tough material live at the bottom of the range where torque works; small holes want the top. A machine that covers both ends handles the whole job list instead of half of it.
Why does the ZXK50 hold its geometry under real work?
Two build points matter most on this machine: the base castings are special cast iron, using the bed and saddle from the vertical machining centre build. the table sits lower to the floor than on a conventional drill, which makes loading and unloading easier; and guideways and table are quenched and ground and run against plastic-faced liners with automatic intermittent lubrication, so feed stays smooth without stick-slip. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
What options are catalogued for the ZXK50?
Catalogued options for the ZXK50 include: Tool magazine for light milling work; Fourth-axis rotary indexing table; M5800 control in place of the GSK 980MDi. Options are named line by line on the quotation with the base configuration, so what is written is what arrives — and if an option does not earn its money on your parts, we will say so.
How do I choose between the ZXK50 and the D50 / D60?
Both sit in the cNC drilling and milling machine group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
How soon can the ZXK50 ship, and what covers it afterwards?
Standard configurations generally ship within 30 to 60 days of a confirmed order, with the date written into the contract. The ZXK50 then carries a 12-month warranty on main components, handled by the plant that built it, with lifetime technical support and spare parts identified by part number at handover.
