CAK61100B-CAK61125B-CAK61140B-CAK61160B Flat-bed CNC Lathe

The catalogued control is FANUC 0i-TF PLUS / Siemens 828D. Whatever package you settle on is named in the contract by brand, model and option pack — a control can be the right brand and still lack the cycles a given part needs, so the option list gets confirmed line by line before anything is ordered.

The CAK61100B-CAK61125B-CAK61140B-CAK61160B carries a Φ130 mm main spindle bore. Remember usable bar capacity always runs smaller than the bore itself once the chuck or collet mechanism is in place, so check your maximum bar stock against the workholding you intend to run, not against the bore figure alone.

The catalogued range is 10–32; 30–60; 50–120; 110–300 r/min. The span matters more than the top figure: large diameters and tough materials live at the low end where torque does the work, while small-diameter finishing wants the top end. A range that covers both ends is what lets one machine carry mixed work.

Both sit in the horizontal CNC lathe group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.

Every CAK61100B-CAK61125B-CAK61140B-CAK61160B is laser-measured to ISO 230-2 over its travels, cuts a test piece that is measured rather than admired, and ships with a serial-numbered report carrying the measured values. If any line misses, the machine goes back into the shop until it passes — the report is a record, not a promise.