CNC vertical lathe
2CM51T CNC Vertical Lathe
A twin-lift, twin-head CNC vertical turning and grinding machine. The cross rail carries two vertical heads: a grinding head, standard on the left, and a turning head. The grinding head uses an electric wheel spindle for a more compact build, and the turning head takes either the CK51D tool post or the CH51T post with magazine. The grinding head runs on linear guideways in the vertical axis for dynamic response during reciprocating grinding, and the vertical head can be swivelled. An angle encoder in the head centre feeds the angle back to the control panel.
Specification
Published catalogue figures; specifications are subject to change without notice. Remarks record what is standard and what varies with the configuration chosen.
| Item | Unit | 2CM5116T | 2CM5120T | 2CM5123T | Remarks |
|---|---|---|---|---|---|
| Max. machining diameter | mm | 1600 | 2000 | 2300 | |
| Max. swing diameter | mm | 1620 | 2020 | 2320 | |
| Table diameter | mm | 1400 | 1800 | 2000 | |
| Max. turning height (table top to tool-clamp underside) | mm | 1200 | 1250 | 1350 | Standard |
| Optional max. turning height limit | mm | 1600 | 1800 | 1800 | |
| Max. grinding height (table top to wheel underside) | mm | Max. turning height − 300 | |||
| Table speed range | r/min | 5–160 | 3.2–100 | 3.2–100 | |
| Table speed steps | — | Four gears, stepless | Standard | ||
| Optional speed steps | — | Two gears, stepless | Requires servo main motor | ||
| Max. table load | t | 8 | 10 | 10 | Rolling guideway |
| Vertical tool-post feed range | mm/min | 0.1–1000 | Stepless | ||
| Vertical tool-post rapid traverse | mm/min | 2000 | |||
| Vertical tool-post horizontal travel | mm | -50–1000 | -50–1150 | -50–1350 | Varies with configuration |
| Vertical grinding-post vertical travel | mm | 1000 | |||
| Cross-rail travel (movement along the column) | mm | Max. machining height − 350 | |||
| Main motor power | kW | 30 | 37 | 37 | Other ratings available |
| Max. table torque | kN·m | 17.9 | 35.3 | 35.3 | Varies with configuration |
| Cross-rail lifting speed | mm/min | 440 | |||
| Max. cutting force of vertical tool-post | kN | 25 | |||
| Machine footprint (L × W) | mm | 4700×2600 | 5200×2985 | 5700×3300 | Excluding guarding |
| Footprint with semi-enclosed guard (L × W) | mm | 5200×3805 | 5700×4325 | 6100×4220 | |
| Minimum height | mm | 3300 | 3700 | 3700 | Varies with configuration |
| Machine weight | t | 12.6 | 17 | 18 | Varies with configuration |
| Accuracy grade | — | IT7 | |||
| Positioning accuracy | mm | 0.025/1000 | |||
| Repeat positioning accuracy | mm | 0.01/1000 | |||
| Reverse deviation | mm | 0.012/1000 | |||
What Is Built Into It
- Twin-ballscrew cross rail lift, bed ways laid out thermally symmetric
- Table and table base cast as one thermally symmetric structure
- Table spindle on two NN3000K double-row short cylindrical roller bearings
- Horizontal gearbox drive with two, four or sixteen speed steps
- BT50 magazine interface on the turning-centre variants
- Closed-loop control, grinding function and in-machine tool setting available to order
Request A Quote
Get A Tailored Quote For The 2CM51T
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The 2CM51T Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The 2CM51T
What spindle speeds does the 2CM51T run, and why does the range matter?
The catalogued range is 5–160 / 3.2–100 / 3.2–100 r/min. The span matters more than the top figure: large diameters and tough materials live at the low end where torque does the work, while small-diameter finishing wants the top end. A range that covers both ends is what lets one machine carry mixed work.
Why does the 2CM51T hold its geometry under real work?
Two build points matter most on this machine: twin-ballscrew cross rail lift, bed ways laid out thermally symmetric; and table and table base cast as one thermally symmetric structure. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
How do I choose between the 2CM51T and the CH51T?
Both sit in the cNC vertical lathe group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
What acceptance testing does the 2CM51T go through?
Every 2CM51T is laser-measured to ISO 230-2 over its travels, cuts a test piece that is measured rather than admired, and ships with a serial-numbered report carrying the measured values. If any line misses, the machine goes back into the shop until it passes — the report is a record, not a promise.
