Conventional lathe
CW61180L CW61200L CW61250L Conventional Lathe
A general-purpose manual lathe for turning cylindrical and conical surfaces and for cutting metric, imperial, module and diametral pitch threads. It also drills and cuts oil grooves, and handles cast iron, steel and non-ferrous material.
Specification
Catalogue figures for the current build; specifications are subject to change without notice. Bed length, chuck and steady rests are configured to the job.
| Item | Unit | CW61180L / CW62180L | CW61200L / CW62200L | CW61250L / CW62250L |
|---|---|---|---|---|
| Capacity | ||||
| Max. swing diameter over bed | mm | 1840 | 2040 | 2500 |
| Max. swing diameter over cross slide | mm | 1450 | 1650 | 2000 |
| Max. swing diameter over gap | mm | 2300 | 2400 | 2900 |
| Width of bed | mm | 1100 | ||
| Max. length of workpiece | mm | 1000–16000 | ||
| Spindle | ||||
| Spindle nose | — | A15 | ||
| Spindle bore diameter | mm | 130 | ||
| Taper of spindle bore | — | Metric No.140# | ||
| Range of spindle speed | r/min | 3.15–315, 21 kinds | ||
| Feeds and threads | ||||
| Longitudinal feed range | mm/r | 0.1–12, 56 kinds | ||
| Transversal feed range | mm/r | 0.05–6, 56 kinds | ||
| Metric thread range | mm | 1–120, 44 kinds | ||
| Inch thread range | TPI | 3/8–28, 31 kinds | ||
| Module thread range | mm | 0.5–60, 45 kinds | ||
| Pitch thread range | TPI | 1–56, 25 kinds | ||
| Tailstock | ||||
| Tailstock sleeve taper | — | Metric 80# | ||
| Tailstock sleeve diameter | mm | 260 | ||
| Tailstock sleeve travel | mm | 200 | ||
| Drives | ||||
| Main motor power | kW | 30 | ||
| Rapid motor power | kW | 1.5 | ||
| Coolant pump power | kW | 0.125 | ||
What Is Built Into It
- One-piece high-strength cast iron bed for rigidity and accuracy
- Way surfaces hardened by ultrasonic-frequency quenching
- Headstock gears hardened and ground for accuracy and low noise
- Gap section for larger diameter flange and disc work
- Taper attachment available for taper turning
Request A Quote
Get A Tailored Quote For The CW61180L CW61200L CW61250L
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The CW61180L CW61200L CW61250L Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The CW61180L CW61200L CW61250L
How large a bar passes through the CW61180L CW61200L CW61250L’s spindle?
The CW61180L CW61200L CW61250L carries a 130 mm spindle bore diameter. Remember usable bar capacity always runs smaller than the bore itself once the chuck or collet mechanism is in place, so check your maximum bar stock against the workholding you intend to run, not against the bore figure alone.
Is the CW61180L CW61200L CW61250L’s speed range wide enough for mixed work?
The catalogued range is 3.15–315, 21 kinds r/min. The span matters more than the top figure: large diameters and tough materials live at the low end where torque does the work, while small-diameter finishing wants the top end. A range that covers both ends is what lets one machine carry mixed work.
What should I look at inside the CW61180L CW61200L CW61250L beyond the spec table?
Two build points matter most on this machine: one-piece high-strength cast iron bed for rigidity and accuracy; and way surfaces hardened by ultrasonic-frequency quenching. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
CW61180L CW61200L CW61250L or CW61180N CW61200N — which fits my work?
Both sit in the conventional lathe group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
What evidence comes with the CW61180L CW61200L CW61250L that it meets spec?
Every CW61180L CW61200L CW61250L is laser-measured to ISO 230-2 over its travels, cuts a test piece that is measured rather than admired, and ships with a serial-numbered report carrying the measured values. If any line misses, the machine goes back into the shop until it passes — the report is a record, not a promise.
