Horizontal CNC lathe
CK61160C-CK61180C-CK61200C Flat-bed CNC Lathe
A flat-bed CNC lathe for shaft and disc work: turning outside and inside diameters, faces, cones, arcs and threads, with grooving and parting off. The bed is cast in one piece and the way faces are hardened by ultrasonic-frequency quenching.
Specification
Published catalogue figures; specifications are subject to change without notice. Beds over eight metres use a rack-drive structure.
| Item | Unit | CK61160C | CK61180C | CK61200C |
|---|---|---|---|---|
| Machine | ||||
| NC system | — | GSK 980TDi or FANUC | ||
| Max. length of workpiece | mm | 3000 / 4000 / 5000 / 6000 | ||
| Max. turning length | mm | 2600 / 3600 / 4600 / 5600 | ||
| Max. swing over bed | mm | Φ1600 | Φ1800 | Φ2000 |
| Max. swing over tool-post | mm | Φ1075 | Φ1275 | Φ1475 |
| Distance between the spindle centre and the flat rail surface | mm | Φ800 | Φ900 | Φ1000 |
| Span of guide-way | mm | 970 | ||
| Spindle | ||||
| Spindle head model | — | A215 | ||
| Manual 4-jaw heavy-duty chuck diameter | mm | 1400 | 1600 | 1600 |
| Spindle taper hole | mm | Metric 140 | ||
| No. of spindle speeds | — | Three gears (hydraulic shift) | ||
| Ranges of spindle speeds | r/min | 10–25, 22–60, 45–130 | ||
| Maximum spindle torque | N·m | 20000 | ||
| Feed | ||||
| Transverse feed rate range | mm | 850 | 950 | 1050 |
| Rapid traverse speed of X-axis | m/min | 3 | ||
| Rapid traverse speed of Z-axis | m/min | 6 | ||
| Z-axis screw diameter and pitch | mm | 80*20 / P4 | ||
| X-axis screw diameter and pitch | mm | 50*5 / P4 | ||
| X-axis motor, model | — | 175SJT-M300BH (GSK) / βisc22 / 2000 (FANUC) | ||
| X-axis motor, rated speed | r/min | 1500 / 2000 | ||
| X-axis motor, torque | N·m | 30 (GSK) / 20 (FANUC) | ||
| Z-axis motor, model | — | 175SJT-M380BH (GSK) / βis30 / 2000 (FANUC) | ||
| Z-axis motor, rated speed | r/min | 1500 / 2000 | ||
| Z-axis motor, torque | N·m | 38 (GSK) / 27 (FANUC) | ||
| Main motor | ||||
| Model | — | Z18-4030RD10-40M3J | ||
| Rated speed | r/min | 1500 | ||
| Power | kW | 30 | ||
| Electric tool holder | ||||
| Model | — | AK23380 × 4D, internal coolant type | ||
| Tool carrier shape | mm | 380 × 380 | ||
| Maximum cutting torque | N·m | 3200 | ||
| Indexing time | — | 4 s / 90° | ||
| Tool post size | mm | 50 × 50 | ||
| Tailstock | ||||
| Dia. of tailstock quill | mm | 240 | ||
| Travel of tailstock quill | mm | 300 | ||
| Taper of tailstock quill | — | Morse taper No.6 | ||
8,000–12,000 mm workpiece length
| Item | Unit | CK61160C | CK61180C | CK61200C |
|---|---|---|---|---|
| Machine | ||||
| NC system | — | KND K2000TF1i-D / FANUC 0i-TF PLUS | ||
| Max. length of workpiece | mm | 8000 / 10000 / 12000 | ||
| Max. turning length | mm | 7600 / 9600 / 11600 | ||
| Max. swing over bed | mm | Φ1600 | Φ1800 | Φ2000 |
| Max. turning dia. over slide | mm | Φ1075 | Φ1275 | Φ1475 |
| Span of guide-way | mm | 970 | ||
| Centre height, distance from the lathe bed | mm | 800 | 900 | 1000 |
| Centre height, distance from the ground | mm | 1450 | 1550 | 1650 |
| Spindle | ||||
| Spindle nose | — | A215 | ||
| Spindle taper hole | — | 1:20 / 140 | ||
| Main spindle bore | mm | 130 | ||
| Ranges of spindle speeds | r/min | 10–25; 22–55; 50–130 | ||
| No. of spindle speeds | — | Hydraulic automatic gear change, three gears, stepless within gear | ||
| Feed | ||||
| Rapid traverse speed of X-axis | m/min | 3 | ||
| Rapid traverse speed of Z-axis | m/min | 6 | ||
| X-axis stroke | mm | 850 | 950 | 1050 |
| X-axis screw | — | 50×5 / P4 | ||
| Z-axis stroke | mm | 7600 / 9600 / 11600 | ||
| Z-axis helical rack | — | ZR05005S100 | ||
| Z-axis helical rack, model | — | 0505R100C10 (APEX) | ||
| Z-axis helical rack, module m | — | 5 | ||
| Z-axis helical rack, helix angle β | — | 19°31′42″ | ||
| X-axis motor, model | — | KC180-M28420M8 / βisc22/2000 | ||
| X-axis motor, rated speed | r/min | 2000 | ||
| X-axis motor, torque | N·m | 28.4 / 20 | ||
| Z-axis motor, model | — | KC180-M35015M6 / βiS30/2000 | ||
| Z-axis motor, rated speed | r/min | 1500 / 2000 | ||
| Z-axis motor, torque | N·m | 35 / 27 | ||
| Z-axis motor, quantity | pcs | 2 | ||
| Main motor | ||||
| Model | — | Z18-4030RF10-40M3J | ||
| Rotating speed | r/min | 1000 | ||
| Power | kW | 30 (287 N·m) | ||
| Electric tool holder | ||||
| Tool holder form | — | Vertical four-station | ||
| Model | — | AK23380 × 4D, internal coolant type | ||
| Tool carrier shape | mm | 380 × 380 | ||
| Maximum cutting torque | N·m | 3200 | ||
| Indexing time | — | 4 s / 90° | ||
| Tool post size | mm | 50 × 50 | ||
| Tailstock | ||||
| Dia. of tailstock quill | mm | 240 | ||
| Travel of tailstock quill | mm | 300 | ||
| Taper of tailstock quill | — | Morse No.6 | ||
What Is Built Into It
- One-piece resin-sand cast bed, aged before machining
- Way faces hardened by ultrasonic-frequency quenching
- Saddle contact face lined with Turcite for wear resistance
- Large spindle bore for bar and tube work
- Steady rests available for long shaft work
Request A Quote
Get A Tailored Quote For The CK61160C-CK61180C-CK61200C
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The CK61160C-CK61180C-CK61200C Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The CK61160C-CK61180C-CK61200C
What should I look at inside the CK61160C-CK61180C-CK61200C beyond the spec table?
Two build points matter most on this machine: one-piece resin-sand cast bed, aged before machining; and way faces hardened by ultrasonic-frequency quenching. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
How should I read the Φ1600 / Φ1800 / Φ2000 mm swing figure on the CK61160C-CK61180C-CK61200C?
Swing over bed is clearance — twice the distance from spindle centreline to the bed ways — not the working limit. Quote your largest finished diameter plus workholding, and check it against that second number, not the headline swing.
Which bed length of the CK61160C-CK61180C-CK61200C should I order?
The CK61160C-CK61180C-CK61200C is catalogued with max. length of workpiece options of 3000, 4000, 5000 and 6000 mm. Work from your longest finished part plus chucking and parting allowance, and remember slender work on the longer beds wants steady rests quoted with the machine. Buying excess bed costs floor space and money every day after delivery.
What separates the CK61160C-CK61180C-CK61200C from the CK61200G in this group?
Both sit in the horizontal CNC lathe group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
How soon can the CK61160C-CK61180C-CK61200C ship, and what covers it afterwards?
Standard configurations generally ship within 30 to 60 days of a confirmed order, with the date written into the contract. The CK61160C-CK61180C-CK61200C then carries a 12-month warranty on main components, handled by the plant that built it, with lifetime technical support and spare parts identified by part number at handover.
