Y-axis turn-mill centre
CH46DY Y-axis Turn-mill Centre
A slant-bed turning centre with a BMT power turret and a C-axis, so turning, milling, drilling and rigid tapping are completed in one clamping. X/Z/Y three-axis control brings shaft and disc parts off the machine finished.
Specification
Catalogue figures for the current build; specifications are subject to change without notice. Turret, tailstock and control are configured to the job.
| Item | Unit | CH46DY | CH52DY | CK46F | CK52F |
|---|---|---|---|---|---|
| Capacity | |||||
| Max. swing diameter over bed | mm | Φ600 | |||
| Max. swing diameter over slide | mm | Φ240 | Φ340 | Φ150 | Φ150 |
| Max. turning diameter | mm | Φ350 | Φ350 | Φ150 | Φ150 |
| Max. turning length | mm | 300 | 280 | 150 | 150 |
| Max. bar diameter to be held | mm | Φ45 | Φ52 | Φ45 | Φ52 |
| Max. milling diameter (90° power head) | mm | Φ360 | Φ360 | Φ150 | Φ150 |
| Spindle | |||||
| Max. speed | r/min | 4000 | 3500 | 4000 | 3500 |
| Type of chuck / collet chuck | — | 6″ hollow | 8″ hollow | Type 45 | Type 52 |
| Type of spindle head | — | A2-5 | A2-6 | A2-5 | A2-6 |
| Taper of spindle bore | — | MT No.6 | 1:20/Φ68 | MT No.6 | 1:20/Φ68 |
| Spindle thru-hole | mm | Φ57 | Φ62 | Φ57 | Φ62 |
| Power motor | kW | 7.5/11 | 11/15 | 7.5/11 | 11/15 |
| Feed | |||||
| Travel X/Z/Y | mm | 240/370/60 | 240/370/100 | 380/350/220 | 380/350/220 |
| Rapid traverse X/Z/Y | m/min | 18/20/12 | |||
| Turret | |||||
| Type of Y-axis | — | Orthogonal Y-axis | Orthogonal Y-axis | ||
| Type of turret | — | Power turret | Hydraulic turret + power head | ||
| Capacity of turret | pcs | 15 | 15 | 8+(4+4) | 8+(4+4) |
| Tool rod dimension (turning / boring) | mm | 20×20/Φ25 | |||
| Type of revolving tool | — | BMT40-ER20 | BMT45-ER25 | ER20 | ER20 |
| Max. diameter of tool holder to mount | mm | Φ13 | Φ16 | Φ13 | Φ13 |
| Max. drilling / tapping diameter | mm | Φ8/M8 (45 steel) | Φ8/M8 (45 steel) | ||
| Max. rotating speed of turret power head | r/min | 4000 | 4000 | 3000 | 3000 |
| Rated torque motor of turret power head | N·m | 11.5 | 11.5 | 7.5 | 7.5 |
| Others | |||||
| CNC controller | — | SYNTEC 22TB-E | SYNTEC 22TB-E | GSK 988TA | GSK 988TA |
| Power capacity | kVA | 22 | 30 | 20 | 28 |
| Slant degree of bed | deg | 30° | |||
| Volume of coolant pump | L | 80 | |||
| Motor power of coolant | W | 370 | |||
| Weight of machine | kg | 4000 | |||
| Dimension of machine (L × W × H) | mm | 2340×1930×1960 | |||
What Is Built Into It
- Integrated base with 30° slant bed, giving high rigidity and stability
- Orthogonal Y-axis with a 15-station servo power turret of BMT type for heavy milling
- Imported high-precision spindle bearings: high stability, long life and lasting machining accuracy
- Large-section heavy-duty precision roller rails on the feed axes: high rigidity, low damping, high precision
- C3 precision ballscrews on the feed axes, pre-stretched at assembly for low thermal drift and high transmission accuracy
- High-precision C-axis with hydraulic disc brake holds milling and drilling accuracy
- Side or rear chip removal, selectable to suit the installation
Request A Quote
Get A Tailored Quote For The CH46DY
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The CH46DY Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The CH46DY
Can the CH46DY take bar or tube work through the spindle?
The CH46DY carries a MT No.6 / 1:20/Φ68 / MT No.6 / 1:20/Φ68 taper of spindle bore. Remember usable bar capacity always runs smaller than the bore itself once the chuck or collet mechanism is in place, so check your maximum bar stock against the workholding you intend to run, not against the bore figure alone.
What should I look at inside the CH46DY beyond the spec table?
Two build points matter most on this machine: integrated base with 30° slant bed, giving high rigidity and stability; and orthogonal y-axis with a 15-station servo power turret of bmt type for heavy milling. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
CH46DY or CH5255SY — which fits my work?
Both sit in the y-axis turn-mill centre group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
What evidence comes with the CH46DY that it meets spec?
Every CH46DY is laser-measured to ISO 230-2 over its travels, cuts a test piece that is measured rather than admired, and ships with a serial-numbered report carrying the measured values. If any line misses, the machine goes back into the shop until it passes — the report is a record, not a promise.
