Y-axis turn-mill centre
SKD-600CY Y-axis Turn-mill Centre
A slant-bed turning centre with a BMT power turret and a C-axis, so turning, milling, drilling and rigid tapping are completed in one clamping. X/Z/Y three-axis control brings shaft and disc parts off the machine finished.
Specification
Catalogue figures for the current build; specifications are subject to change without notice. Control, chuck and turret are configured to the job.
| Item | Unit | SKD-600CY |
|---|---|---|
| Capacity | ||
| Max. swing diameter (bed) | mm | Φ600 |
| Standard machining dia. | mm | Φ200 |
| Max. machining dia. | mm | Φ300 |
| Max. machining length | mm | 530 |
| Bar diameter | mm | Φ51 |
| Spindle | ||
| Chuck size | in | 8″ / 10″ |
| Type of spindle head | — | A2-6 |
| Spindle bore | mm | Φ66 |
| Taper of inner hole | — | 1:20 (large end Φ70) |
| Spindle max. speed | r/min | 4000 |
| Feed | ||
| Travel of X/Z/Y axis | mm | 260 / 620 / +50 −50 |
| Screw dia. × pitch of X/Z/Y | mm | Φ32 × 10 |
| Rapid speed of X/Z/Y | m/min | 24 / 24 / 18 |
| Turret | ||
| Type of turret | — | Power turret |
| Number of tool stations | pcs | 12 |
| Centre height | mm | 100 |
| Tool size, turning / boring | mm | 25 × 25 / Φ32 |
| Power tool holder | — | BMT55 / ER32 |
| Milling speed | r/min | 4000 |
| Tailstock | ||
| Taper of sleeve inner hole | — | MT4# (fixed centre) |
| Travel of tailstock | mm | 420 |
| Type of tailstock | — | Hydraulic (programmable) |
| Motor | ||
| Mechanical spindle power | kW | 11 / 15 (FANUC)11 / 16.5 (SYNTEC) |
| Mechanical spindle torque | N·m | 105 (FANUC)144 (SYNTEC) |
| Power of X/Z/Y motor | kW | 1.8 / 3 / 3 (FANUC)3.1 / 3.1 / 3.1 (SYNTEC) |
| Torque of X/Z/Y motor | N·m | 11 / 20 / 20 (FANUC)15 / 15 / 15 (SYNTEC) |
| Power of milling motor | kW | 4.5 (FANUC) / 5.7 (SYNTEC) |
| Torque of milling motor | N·m | 18 (FANUC) / 18 (SYNTEC) |
| Others | ||
| Power of cooling pump motor | kW | 0.55 |
| Power capacity | kVA | 40 |
| Volume of hydraulic station | L | 40 |
| Volume of lubrication pump | L | 4 |
| Volume of cooling tank | L | 150 |
| Machine weight | kg | 5500 |
| Overall dimension (L × W × H) | mm | 2900 × 1950 × 2150 |
What Is Built Into It
- Integrated stepped or 30° slant bed with a large span
- BMT servo power turret, orthogonal or interpolated Y-axis
- Imported high-precision spindle bearings for stability and long life
- Heavy-duty precision roller rails, low damping and high rigidity
- C3 precision ballscrews, pre-stretched at assembly
- High-precision C-axis with hydraulic disc brake
- Side or rear chip removal to suit the installation
Request A Quote
Get A Tailored Quote For The SKD-600CY
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The SKD-600CY Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The SKD-600CY
Can the SKD-600CY take bar or tube work through the spindle?
The SKD-600CY carries a Φ66 mm spindle bore. Remember usable bar capacity always runs smaller than the bore itself once the chuck or collet mechanism is in place, so check your maximum bar stock against the workholding you intend to run, not against the bore figure alone.
What should I look at inside the SKD-600CY beyond the spec table?
Two build points matter most on this machine: integrated stepped or 30° slant bed with a large span; and bmt servo power turret, orthogonal or interpolated y-axis. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.
What separates the SKD-600CY from the CH46DY in this group?
Both sit in the y-axis turn-mill centre group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
What evidence comes with the SKD-600CY that it meets spec?
Every SKD-600CY is laser-measured to ISO 230-2 over its travels, cuts a test piece that is measured rather than admired, and ships with a serial-numbered report carrying the measured values. If any line misses, the machine goes back into the shop until it passes — the report is a record, not a promise.
