JVH-500 Horizontal Machining Centre

The JVH-500 runs a 12000 / 4500 (6000 opt.) r/min spindle speed. Aluminium work spends its time at the top of the speed band; steel roughing lives on torque lower down. Match the spindle to the material mix you actually cut week to week, and say so in the enquiry — the spindle line is confirmed in the contract.

Two build points matter most on this machine: the casting adopts an integrated box design with a dual ribbing arm structure, giving optimal support and dynamic stability; and all three axes run ball linear slide rails with a low friction coefficient, and the rail span follows a golden-ratio distribution for accurate, smooth cutting feed. Structure decides how a machine ages — the specification table tells you what it does new, the build tells you what it does in year five.

The JVH-500 carries a 500×500 / 630×630 / 1000×1000 mm table. Size against the fixture, not just the part — as a working rule allow roughly one and a half times the part footprint once workholding is on, and check the load rating against part plus fixture weight. A dense casting can max a table long before it runs out of area.

Both sit in the horizontal machining centre group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.

Standard configurations generally ship within 30 to 60 days of a confirmed order, with the date written into the contract. The JVH-500 then carries a 12-month warranty on main components, handled by the plant that built it, with lifetime technical support and spare parts identified by part number at handover.