Drilling and milling centre
T-10 / T-13 Drilling and Milling Centre
Long-bed drilling and tapping centres carrying 1000 – 1300 mm of X travel on a BT30 direct-drive 20000 rpm spindle, taking workpieces that will not fit a standard tapping machine.
Features
- Golden-ratio span design, so high-speed and high-precision machining is better held.
- Direct-drive spindle: speed is output straight from the motor shaft, giving clean tapping.
- Extra-long X/Y travel breaks the limit where conventional drilling and tapping machines cannot take large workpieces.
Specification
Published catalogue figures for the series; the columns for this model are highlighted. Options and non-standard travels are quoted separately.
| Item | Unit | T-10 | T-13 | TH-1370 | T-16 |
|---|---|---|---|---|---|
| Travel | |||||
| X axis travel | mm | 1000 | 1300 | 1300 | 1600 |
| Y axis travel | mm | 500 | 700 | 420 | |
| Z axis travel | mm | 300 | 450 | 300 | |
| Distance from spindle nose to worktable | mm | 180-480 | 150-450 | 150-600 | 150-450 |
| Distance from spindle center to column | mm | 538 | 755 | 519 | |
| Workbench | |||||
| Workbench size | mm | 1100×500 | 1400×500 | 1400×700 | 1720×500 |
| T-slot (size×slot no.×space) | mm | 14×5×80 | 14×5×125 | 14×5×80 | |
| Maximum load of workbench | kg | 400 | 450 | 600 | 500 |
| Spindle | |||||
| Speed | r/min | 20000 | |||
| Spindle taper | — | BT30 | |||
| Transfer method | — | Direct drive | |||
| Feed | |||||
| Three-axis cutting feed | mm/min | 1-10000 | |||
| Three-axis rapid feed | m/min | 48/48/48 | 36/36/48 | ||
| Precision GB/T20957.4-2007 | |||||
| Positioning precision | mm | 0.008/0.005/0.005 | 0.010/0.005/0.005 | 0.010/0.007/0.005 | 0.010/0.005/0.005 |
| Repeatability | mm | 0.005/0.003/0.003 | 0.005/0.003/0.003 | 0.006/0.004/0.003 | 0.006/0.003/0.003 |
| Tool changing system | |||||
| Number of tools | pcs | 21 | |||
| Max tool weight | kg | 3 | |||
| Max tool length | mm | 250 | |||
| Tool diameter (full tool / neighbour empty tool) | mm | 100/140 | |||
| Tool magazine form | — | Jaw type (servo) | |||
| CNC system | |||||
| Control system | — | FANUC 0i-MF | MITSUBISHI M80 | FANUC 0i-MF | |
| Spindle motor power | kW | 3.7/9 | 3.7/5.5 | 3.7/9 | |
| Three-axis motor power | kW | 2.7/2.7/3.0 | 3.0/3.0/3.0 | ||
| Others | |||||
| Required air pressure | kgf/cm² | ≥6 | |||
| Electricity demand | kVA | 20 | |||
| Dimensions (L×W×H) | mm | 2460×2835×2670 | 3120×2860×2670 | 3110×3280×3110 | 3800×2665×2670 |
Drive Configuration
Axis and spindle motors as fitted with the standard control package. Other combinations are quoted on request.
| Axis Name | Standard FANUC 0i MF Plus | ||
|---|---|---|---|
| Motor Model | Motor Power | Max Torque | |
| X | αiS 12/4000 | 2.7KW | 46N.m |
| Y | αiS 12/4000 | 2.7KW | 46N.m |
| Z | βiS 22/3000-B | 3KW | 45N.m |
| SP | αiI 3/12000 | 3.7/13KW | 82.8N.m |
| SP (OPT) | αiI 2/20000-B | 3.7/9KW | 28.7N.m |
Request A Quote
Get A Tailored Quote For The T-10 / T-13
Send The Largest Part Dimensions, The Material And The Tightest Tolerance. Our Engineers Confirm Whether The T-10 / T-13 Fits And Reply With A Detailed Quotation.
- +86 15162661999
- info@hankray.com
-
Room 1804-2, No. 33 Xinggui Street, Suzhou Industrial Park, Suzhou, Jiangsu, China
Model FAQs
Questions Engineers Ask About The T-10 / T-13
What travels does the T-10 / T-13 give me to work with?
The T-10 / T-13 runs X 1000 / 1300 / 1300 / 1600 mm, Y 500 / 700 / 420 mm, Z 300 / 450 / 300 mm. Check the envelope with the longest tool at the part’s tallest point — Z is the axis that runs out first on most jobs — and keep 20–30 % margin over your largest recurring part rather than sizing to a one-off.
What tooling does the T-10 / T-13 carry?
The T-10 / T-13 is catalogued with a BT30 spindle taper. Size the magazine to the tool count of your most complex regular job plus a buffer for sister tooling and wear — running out of pockets mid-cycle costs more than the pockets ever did.
Mitsubishi or FANUC on the T-10 / T-13 — what changes?
The T-10 / T-13 is tabled with both Mitsubishi M80 and FANUC 0i MF Plus packages, each with matched axis and spindle motors — the drive configuration table on this page names motor models, power and torque per axis. Other combinations are quoted on request, and whichever you choose is written into the contract line by line.
T-10 / T-13 or T-5C / T-7C — which fits my work?
Both sit in the drilling and milling centre group, so the decision is capacity and duty, not kind: put your largest part dimensions, material and yearly quantity against each specification table and one of the two will run out of a figure first. Send the drawing and we will name which of the two fits — including the case where the smaller machine does the job.
What evidence comes with the T-10 / T-13 that it meets spec?
Every T-10 / T-13 is laser-measured to ISO 230-2 over its travels, cuts a test piece that is measured rather than admired, and ships with a serial-numbered report carrying the measured values. If any line misses, the machine goes back into the shop until it passes — the report is a record, not a promise.
